ADO Air 20
Unboxing and installation video
Mud flap installation
Brake adjustment
Display Function Introduction
User manual
Common problems of ebike.
Is ADO Air 20 certified?
According to SGS CE EN15194 and SGS UKCA, ADO Air conforms to the requirements of the Machinery Directive (2006/42/EC), the EMC Directive (2014/30/EU), and the Radio Equipment Directive (2014/53/EU), and DIN EN 15194:2017, and ADO Air battery complies with UN 38.3 lithium-ion battery testing standards.
What’s the difference between Air20 and Air20 pro?
The Air 20 Pro and Air 20 distinguish themselves through several key features:
1. Motor Type: The Air 20 Pro features a Bafang motor for improved efficiency and uphill performance.
2. Drive System: Equipped with an automatic transmission, the Air 20 Pro offers smoother speed transitions and an effortless riding experience compared to the Air 20.
3. Rear Turn Lights: Unique to the Air 20 Pro, these lights improve safety by providing clear signaling to other road users, enhancing visibility and safety.
4. Lockout Suspension Fork: Adjustable for terrain, balancing efficiency and comfort.
5. Aluminum Mudguards: They offer durable protection, keeping you dry and enhancing ride comfort.
These enhancements make the Air 20 Pro a more advanced choice, offering superior performance, safety, and versatility for a variety of riding conditions.
error 02 Brake handle failure.
Under the state of turning on the display, unplug the red connector of the left and right power-off sensors in turn to test.
You can refer to the video test.
If after unplugging the red connector of the left brake sensor, err 02 disappears and the display returns to normal, it means that the left brake sensor is faulty and the left brake sensor needs to be replaced.
If after unplugging the right brake sensor connector, err 02 disappears and the display returns to normal, then the right brake sensor is faulty and needs to be replaced.
error 08 Motor Hall Failure.
Check the rear wheel motor wires for looseness, breakage, etc. and test by re-plugging the connector that connects the motor to the controller. If the motor cable is intact and the connector to the controller is correctly connected, and error 08 is still displayed, the motor may have an internal hall fault, and the motor will need to be replaced to test.
Display cannot be switched on.
If the bike display can no longer be switched on
1, check if the battery can be switched on properly and if the button green light of the battery is on.
2, Check if the power cord plug behind the battery is properly plugged in.
3, Check if the connector at the front of the display is loose. If all the above connectors are plugged in correctly and the display still does not turn on, please fold the bike up again and check if the connector in the folded position is loose. You may pull out the cable inside the frame to check.
Refer to the video for inspection: video
If the display still doesn't turn on even though all the connectors are not loose, you need to replace the display with a new one for testing.
Power cord link instructions: